Ruijie Community

Title: Bandwidth control on RG EW1200 [Print this page]

Author: nureko.nep78@gm Time: 2024-2-26 18:36
Title: Bandwidth control on RG EW1200
Edited by Nureko Pras at 2024-2-26 18:36

Does the Ruijie RG EW1200 support bandwidth control settings and how?

Author: liujunhui1@ruij Time: 2024-2-26 19:02
Dear sir

You can refer to this link to configure flow control on the EW1200

https://www.ruijienetworks.com/resources/preview/Web-based-Configuration-Guide-ReyeeOS-1204

Author: nureko.nep78@gm Time: 2024-2-26 19:09

GTAC-Ross replied at 2024-2-26 19:02
Dear sir

You can refer to this link to configure flow control on the EW1200

Thank you for your reply, that's for setting the overall bandwidth limit, how do you do it to set the bandwidth per device?

Author: liujunhui1@ruij Time: 2024-2-26 20:06

Nureko Pras replied at 2024-2-26 19:09
Thank you for your reply, that's for setting the overall bandwidth limit, how do you do it to set ...

Dear sir
On the flow control
you can see there is custom policy
in that case, we can set up flow control based on the single device by one ip address or
configure flow control based on the ip range for mutiple devices

Author: nureko.nep78@gm Time: 2024-2-26 20:43

GTAC-Ross replied at 2024-2-26 20:06
Nureko Pras replied at 2024-2-26 19:09
Thank you for your reply, that's for setting the overall band ...

Oke, many thanks

Welcome to Ruijie Community (https://community.ruijienetworks.com/)