Title: RG-EG105G-P-V2 and IPv6 [Print this page] Author: oebvad@yandex.r Time: 2024-3-4 16:59 Title: RG-EG105G-P-V2 and IPv6 I need to close all IPv6 outbound/inbound traffic to the internet for a specific device(192.168.200.10) on the local network.
I look to the "IPv6 Interface Configuration" and I see there "Wan=No"
Does this mean that no IPv6 traffic should be allowed into my network for all devices? Or do I need to write some additional rule for 192.168.200.10? Author: liujunhui1@ruij Time: 2024-3-4 17:05
Dear sir
if you want to block traffic of IPV6 devices
you can configure ipv6 based on the ip address here to block the traffic
Best regards,
ross Author: oebvad@yandex.r Time: 2024-3-4 20:35
Thanks for the reply, but I can't find that section. Here is a screenshot from the app (Android) - there is no IPv6. I can't find these settings via Cloud Web Interface either
