Ruijie Community

Title: Ruijie RG-WLAN Series Access Controllers Configuration Guide, RGOS11.9(6)W3B13 (V1.2) [Print this page]

Author: uralhub@gmail.c    Time: 2024-4-26 02:12
Title: Ruijie RG-WLAN Series Access Controllers Configuration Guide, RGOS11.9(6)W3B13 (V1.2)
Hello!
how to download this firmware RGOS11.9(6)W3B13?
at what link?

Author: zhangqiao@ruiji    Time: 2024-4-26 09:55
Hi Dmitry Shalaev

May I know what‘s your current issue you are facing?
It's recommanded to upload the latest version of WS6008. Here is the link: Ruijie RG-WS6008&6108 Wireless Controller Firmware - Ruijie Networks.
If you have any other questions, please feel free to tell me. I'm so glad to help you on Community

Author: uralhub@gmail.c    Time: 2024-4-26 13:18
GTAC-Sophia replied at 2024-4-26 09:55
Hi Dmitry Shalaev

May I know what‘s your current issue you are facing?

Solved the question!
I was looking for options to configure Radius Cisco ISE. In the latest versions of W3B1 and W3B4 - Cisco ISE is already present.

Now we need to upgrade the firmware on the cluster W6008
We have version firmware W2B1 - there is no Cisco ISE in it.

Tell me, can I update the firmware version without destroying the cluster to individual devices?
Bulk update the firmware on the cluster (all devices ws6008)?

wlc-002#show virtual-ac

Device_id     Domain_id     Priority      Position      Status        Role          Conn_swid
------------- ------------- ------------- ------------- ------------- ------------- -----------
2(2)          1(1)          150(150)      LOCAL         OK            ACTIVE        1(1)
3(3)          1(1)          100(100)      REMOTE        OK            STANDBY       1(1)
1(1)          1(1)          200(200)      REMOTE        OK            CANDIDATE     1(1)

wlc-002#show version


System description      : Ruijie Gigabit Wireless Switch(WS6008) By Ruijie Networks.
System start time       : 2023-08-03 12:13:09
System uptime           : 266:22:00:21
System hardware version : 1.60
System software version : AC_RGOS 11.9(6)W2B1, Release(10162720)
System patch number     : NA
System serial number    : G1SXXX
System boot version     : 1.2.13
Module information:
  Slot 2/0 : WS6008
    Hardware version    : 1.60
    Boot version        : 1.2.13
    Software version    : AC_RGOS 11.9(6)W2B1, Release(10162720)
    Serial number       : G1SXXX
  Slot 1/0 : WS6008
    Hardware version    : 1.60
    Boot version        : 1.2.13
    Software version    : AC_RGOS 11.9(6)W2B1, Release(10162720)
    Serial number       : G1SXXX
  Slot 3/0 : WS6008
    Hardware version    : 1.60
    Boot version        : 1.2.13
    Software version    : AC_RGOS 11.9(6)W2B1, Release(10162720)
    Serial number       : G1SXXX

Author: guominxiang@rui    Time: 2024-4-26 14:47
Dmitry Shalaev replied at 2024-4-26 13:18
Solved the question!
I was looking for options to configure Radius Cisco ISE. In the latest versio ...
Hello Dmitry Shalaev,
Based on your sharing, it seems that what you have configured is not a cluster, but a VAC.

If you want to consult how to upgrade the VAC device:
You can log in to the main AC and upgrade. All member will upgrade and restarted.
Please note that AC versions of different versions will be upgraded to the corresponding version. AC versions of the same version will only restart with the whole VAC and will not be upgraded
If the issue still exists, please talk with me again. I would be glad to help you in Community.





Welcome to Ruijie Community (https://community.ruijienetworks.com/) Powered by Discuz! X3.2