Ruijie Community

Title: S1920 series switch can't configure MTU under interface [Print this page]

Author: GTAC-Daisy    Time: 2022-5-18 16:51
Title: S1920 series switch can't configure MTU under interface
S1920 series switch can't configure  MTU under interface
Ruijie(config-if-GigabitEthernet 0/25)#mtu
% Unknown command.


Author: GTAC-Daisy    Time: 2022-5-18 16:51
only  support config from global mode, and then all port will change to some MTU
Ruijie#sh interfaces f0/1 | i  MTU
  MTU 9216 bytes, BW 100000 Kbit
Ruijie#sh interfaces gi0/25 | i  MTU
  MTU 9216 bytes, BW 1000000 Kbit




Welcome to Ruijie Community (https://community.ruijienetworks.com/) Powered by Discuz! X3.2