Title: S1920 series switch can't configure MTU under interface [Print this page] Author: GTAC-Daisy Time: 2019-3-28 09:29 Title: S1920 series switch can't configure MTU under interface
S1920 series switch can't configure MTU under interface
Ruijie(config-if-GigabitEthernet 0/25)#mtu
% Unknown command.
Author: GTAC-Daisy Time: 2019-3-28 09:30
only support config from global mode, and then all port will change to some MTU
Ruijie#sh interfaces f0/1 | i MTU
MTU 9216 bytes, BW 100000 Kbit
Ruijie#sh interfaces gi0/25 | i MTU
MTU 9216 bytes, BW 1000000 Kbit
Welcome to Ruijie Community (https://community.ruijienetworks.com/)