Ruijie Community

Title: How to reset AP password [Print this page]

Author: GTAC-Daisy Time: 2019-3-29 10:46
Title: How to reset AP password
Edited by Daisy at 2019-3-29 11:10

I forget my AP password, how can I reset it?

Author: GTAC-Daisy Time: 2019-3-29 13:16

Fit mode

When you login in fit mode using console port ,its default password is ruijie apdebug.

Fat mode

When you login in fit mode using console port ,its default enable password is admin
when you forget your password, you can reset itrefer to the guide as blew:

I. Network Topology

II. Requirements

1. Finish reading System Management--> Console Management.

2. Login AP CLI via Console.

III. Configuration Steps

Recovering AP password (configurationfile remains)

1. Power off AP, then power up.

2. Press CTRL + C, enter CTRL mode.

3. Input CTRL+Q, enter uboot mode. Andthen input "main_config_password_clear"

4. Device will reload automatically.

3. When finish reloading, enterCLI without input password.

Note: The default timeout period is10min. Please change your password before time out.

4. Change password, and then usethe command “wr” to save your configuration.

5. save configuration

Re-login AP, execute commands "showruning-config" to check configurations.

Recover AC &Fat AP password.pdf

355.83 KB, Downloads: 606

Author: GTAC-Daisy Time: 2019-4-16 20:06
If "main_config_password_clear" don't work. You can refer to this guide to reset its password
1. Ctrl +C Ctrl +Q
2. Import ubootui and then press enter Ctrl+P
3.import 'setenv runlevel 1'
4.import 'run linux'
5.cd/data
6.cat config. text ----if the password is clear password, you can find it there directly
7.rm -rf config. text
8.reboot and then repeat step 1 and step 2
9.setenv runlevel 3
10.saveenv
11. run linux
12.delete the enable password commond

Welcome to Ruijie Community (https://community.ruijienetworks.com/)