Vlan over two switches
|
Wanting to create a couple of vlans to separate my IP cameras, a guest network on a separate AP and a couple of IoT devices (so in effect 3 Vlans) that cannot see or communicate with one another) The switches are the RG-ES210GS-P and the RG-ES206GC-P. The router (3rd party) does not support vlans. Is it possible to do this? And if so, how. Have followed a few instructional videos to no avail. |
|
Dear customer, Unfortunately, to configure the VLANs you need. You will need a gateway(Usually it is your router) that supports the VLAN function for your AP and IP cameras. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
