Forgot password?
 Register now

Welcome to use this form to feedback your problems with Ruijie Community

The category of your feedback

Your Feedback

Your Email address (optional):

Why is the network speed only 100 Mbit/s to 200 Mbit/s after an EG series device is connected with flow control disabled while the network speed reaches 300 Mbit/s in direct connection to a WAN line? Reply

linxihao@ruijie

Level 1

Why is the network speed only 100 Mbit/s to 200 Mbit/s after an EG series device is connected with flow control disabled while the network speed reaches 300 Mbit/s in direct connection to a WAN line?
3092 2 2019-6-27 17:03:17
Original
The EG series device performance or the number of sessions isrestricted.

0 2023-12-6 01:38:02 View all replies
Mine also same problem. MY EG209GS gateway is connected through CDATA fiber router. When I conncet directly by the CDATA router's lan port and test the speed it shows more than 900 mbps but when the gateway wan is uplink to CDATA router and I test through the LAN port of the Gateway device the speed drops to 10 mbps.
No a flow control enabled, no any ACL rules enabled, reset the device and re configure ... still the problems not solved.

0 2023-12-6 08:52:40 View all replies
rabins_sky replied at 2023-12-6 01:38
Mine also same problem. MY EG209GS gateway is connected through CDATA fiber router. When I conncet d ...

Dear:

can you help us to know whether your reyee EG is a new device or you have used it for a while?

if it is not a new device, can you help us to know when the issue happened, please?

Thanks.

Regards

Javier

Releated Posts
Product Model

Share this topic to

Cancel

This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.

More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.

©2000-2023 Ruijie Networks Co,Ltd