Forgot password?
 Register now

Welcome to use this form to feedback your problems with Ruijie Community

The category of your feedback

Your Feedback

Your Email address (optional):

How do I optimize Coverage-area-control? Reply

GTAC-Daisy

Level 1

How do I optimize Coverage-area-control?
4541 0 2019-7-1 14:45:08
Original
The Coverage-area-control parameter is optimized as follows:   
In ap-config mode, Coverage-area-control indicates the TXpower of beacon and probe response frames, and is used to control the APcoverage area and optimize STA access and roaming effects. When a high beaconpower is configured for an AP, and the coverage area is excessively large,remote association or roaming stickiness may occur on STAs, resulting in a lownetwork speed. Different APs have different default powers. Typically, thedefault power is 20 dBm for an indoor AP and 27 dBm for an outdoor AP. For details,see the hardware installation manuals.


Note: If the Coverage-area-control parameter is not adjusted, it is subject tothe power local parameter bydefault.


When optimizing the Coverage-area-control parameter, notethe following:   
In scenarios with simple buildingpattern and evenly distributed AP installation positions, distances, andcoverage areas, use two APs to test the proper Coverage-area-control value. In scenarios with complex buildingpattern and largely different AP installation positions, distances, andcoverage areas, start the test from small powers first. For example, set the 5GHz beacon power to 15 dBm and the 2.4 GHz beacon power to 7 dBm. Then, adjustthe power for APs one by one.


The configuration commands are as follows:
AC(config)#ap-config ap-name
AC(config-ap)#coverage-area-control20 radio 1 //Configuring the TX power for management frames.

There are no replies.
Related Posts
Product Model

Share this topic to

Cancel

This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.

More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.

©2000-2023 Ruijie Networks Co,Ltd