|
Wireguard VPN has a better forwarding performance than OpenVPN, as it works on L3, and for compatibility, it is much more better than IPsec or L2TP over IPsec(which experience many issues with Windows) Reyee EG router in R340 has introduced wireguard, below is the configuration step, currectly it recommended to configure it through eweb: 1. Go to the device eweb, click on VPN>Wireguard VPN> Wireguard VPN server> Add  2. Configure the server parameters of the VPN click Add for adding some Wireguard clients  3. For add a user, input the username and user interface IP, and click   4. After adding the client, click OK for save the configuration  5. Download the wireguard client and import the configuration file to connect to the server.  note: if you experience that you can connect the VPN but no traffic is received, try to delete the configuration file 0.0.0.0/0 and check if it works:  |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
