How to use Ruijie RG-ES208GC for loop protection
|
Hi, I have my home network with topology as per below image, anyone can help me an advise to setup Ruijie RG-ES208GC for solving my issue as explained in the image?  Thanks, Fauzie |
|
Dear customer, You can navigate to Monitoring > Loop Prevention page and enabledloop guard feature . When loop guard feature is enabled, the port causing the loop will be shut down automatically. After the loop is removed, the port will be up automatically. Loop guard function is disabled by default.  |
GTAC-Ryan replied at 2025-5-5 12:08 Hi Thank you for your reply, could advice also port setting in the swirch as per my topology? When i should use trunk or access type Thanks, Fauzie |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
