Request Assistance: Assigning Specific SSIDs to Individual APs Within a Group

Dear Ruijie Support Team,
I am writing to seek guidance on configuring SSID assignments across multiple Access Points (APs) within the same network group. Here are the details of my setup and issue:

Current Setup:

• Number of APs: 3 (all under one group in Ruijie Cloud/local management).
  
• SSIDs Configured: 3 (SSID-A, SSID-B, SSID-C).
  
• Goal:
  
  
  • AP1 & AP2: Broadcast SSID-A and SSID-B (but not SSID-C).
    
  • AP3: Broadcast SSID-C only (disable SSID-A and SSID-B).
    
    
  </li>
• All APs must remain in the same network/VLAN.
  
  

Issue:

• I cannot find an option in Ruijie Cloud or the local web portal to selectively enable/disable SSIDs per AP within a group.
  
• The settings appear to apply universally to all APs in the group.
  
  

Request:

• Confirm if this granular SSID-per-AP configuration is possible.
  
• Provide step-by-step instructions or screenshots to achieve this.
  
• If not natively supported, suggest workarounds (e.g., VLAN tagging, separate groups).
  
  

Additional Information:

• Device Models: RAP2266 x3
  
  
• Firmware Version: [color=rgba(0, 0, 0, 0.9)]ReyeeOS 2.320.0.1525
  
  
• Current Management Method: ☑ Ruijie Cloud ☑ Local Web Portal
  
  

Thank you for your prompt assistance. Please let me know if you need further details