|
When you find PoE switch port can't power for AP, Try to enable poe legacy switch(config)#int gi 0/x switch(config-if)#poe legacy If don't support enable under interface, try to enable on config mode. switch(config)#poe legacy Notice: when enable poe legacy on config mode, need to disable poe on interface don't need to supply POE. Or there is a risk of burning. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
