Please select To the mobile version | Continue to access the desktop computer version
 Forgot password?
 Register now


Wireless

View: 352|Reply: 0

How to change the vlan of AP interface

[Copy link]

0

Digests

350

Posts

352

Credits

Intermediate member

Rank: 3Rank: 3

Credits
352
Post time 2019-8-20 14:18:42 | Show all posts |Read mode
Fat or MACC mode:

Login into AP, using the command as blew to configure the vlan of  AP interface:

AP>en

AP#config ter

AP(config)#interface gi 0/1

AP(config-if-GigabitEthernet 0/1)#encapsulation dot1Q vlan-number

AP(config-if-GigabitEthernet 0/1)#end

AP#wr



Fit mode:

WS6008>en

WS6008#config ter

WS6008(config)#ap-config ap-name

WS6008(config-ap)# wired-vlan 10 port 1 auto-save  //configure port 1 to vlan 10

WS6008(config-ap-config)#end

WS6008#write

Function support:

Through the wired-vlan command can configure the vlan of wired network interface used, the configuration only can be effectively on the AP which have wired network interface, the model of AP only Fit AP products:

They are AP110-W, AP120-W, AP120-S, AP130-W, AP130(L), AP130(W), MAP552,MAP552-W and AP3220-P.


Reply

Use magic Report

You have to log in before you can reply Login | Register now