Please select To the mobile version | Continue to access the desktop computer version
 Forgot password?
 Register now


Ruijie Cloud

View: 83|Reply: 0

[Release Note] Ruijie Cloud V2.6 Updated on March 10 2020

[Copy link]

10

Digests

1002

Posts

1115

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1115
Post time 2020-3-18 10:17:30 | Show all posts |Read mode
New Features
1. Support adding the existing sub account to the network, so that a sub account can manage multiple networks.

2. Support sharing network to other users.




3. Support handing over the network to another tenant.

4. Support Korean captive portal.



Limitations
No.
Module
Description
Details
1ConfigurationIn bridge mode, VLAN 233 is not available.In bridge mode, the VLAN ID of SSID could not be ‘VLAN233’ if there is an SSID working in NAT mode on the same AP. Reason: VLAN233 will be used as the internal VLAN if one or more SSID work in NAT mode.
2APAP740-I does not support LAN2 or dual Ethernet ports.For devices with dual power supply ports, like AP740-I, only going online through LAN1 is supported by MACC.
3History RecordIt will take a while for searching the history.When the data of historical users, connection logs and etc. reach to a million count, the corresponding search operation will take a long time (around 10 seconds).Both big data and server performance cause the problem.
4MaintenanceClient log export failure.Client data export will fail if the number of records is more than 100,000.
5PPSKPPSK can be configured in the root network only.Only the Sub account user who is assigned with the root network is able to configure PPSK.
6ConfigurationIf the SSID Encryption Mode is set to WPA2-Enterprise(802.1X), the RADIUS server only supports port 1812 and port 1813 for authentication and accounting respectively.The RADIUS server supports only port 1812 and port 1813 for authentication and accounting respectively if the SSID Encryption Mode is set to WPA2-Enterprise(802.1X).
7Captive portalCaptive portal seamless is globally configured on APs.If one portal's SSID enables seamless, all portals' SSIDs will be enabled at the same time, vice-versa for the disable function.
8ConfigurationThe NAT address pool mode is changed. An address pool is required.When you create or edit an SSID and set Forward Mode to NAT, the NAT address pool is changed. An address pool is required.
9Sub accountIt is recommended to select a layer-1 network to create a sub account.Only the sub account of layer-1 network can view statistics in Analysis.
10Facebook LikeAn error occurs if the iPhone user taps Like during authentication.If the user authenticates to SSID through the popup page which contains Facebook Like function, when he taps the Like button, an error will occur. In order to normally use Facebook Like function, it is recommended to access the Internet through a browser after connecting to SSID, and then open the portal page.
11Change the time zone of networkAfter the time zone is changed, the data of existing reports are not consistent with the new time zone.After the time zone is changed, the data of existing reports will not be recounted, so the statistics are not consistent with the new time zone. The data of newly-generated reports are correct.
12TunnelTunnel limitation on EG.In the same tenant, up to 10 tunnels can be created. On the same device, up to 5 tunnels can be created. The expiry time for the tunnel is 3 hours.
13ClientLimitation on historical clients displaying.Up to 1000 historical clients are displayed.
14ConfigurationSome data are not synced to EG.The Data Quota and MAC Concurrent Devices of vouchers and accounts are not synced to the EG.
15ConfigurationLimitation on historical clients displaying.To activate the Max Download Rate and Max Upload Rate delivered to the EG, the flow control function should be disabled.





Ruijie Cloud V2.6 Updated on March 10 2020.pdf

759.85 KB, Downloads: 9

Reply

Use magic Report

You have to log in before you can reply Login | Register now