Please select To the mobile version | Continue to access the desktop computer version
 Forgot password?
 Register now


Router

View: 3738|Reply: 1

How do I use the MGMT interface on the RSR77 engine to upgrade the router?

[Copy link]

14

Digests

1028

Posts

1161

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1161
Post time 2017-5-4 11:32:45 | Show all posts |Read mode
How do I use the MGMT interface on the RSR77 engine to upgrade the router?
Reply

Use magic Report

14

Digests

1028

Posts

1161

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1161
 Author| Post time 2017-5-4 11:33:23 | Show all posts
1. Place the system file in the TFTP directory.

2. Log in to the RSR77 router by using the console cable.

3. Run the following command to display the current version:
Ruijie#sh version

4. Use a network cable to connect the TFTP server and the router's MGMT interface.

5. Configure the IP address and gateway of the MGMT interface to enable the interface to communicate with the TFTP server.
Ruijie(config)#interfacemgmt 0
Ruijie(config-if-Mgmt0)#ip address 172.18.10.23 255.255.255.0
Ruijie(config-if-Mgmt0)#gateway 172.18.10.1

6. Test the connectivity to the TFTPserver.
Ruijie#ping oob192.168.33.51 //IP address of the PC

7. Check the free space of the flash memory.
Ruijie#dir

8. Transfer the firmware to the router's flash memory.
Ruijie#copy oob_tftp://192.168.51.23/RSR77_10.4(3b21)_R171722_install.bin flash:rgos.bin

9. After the automatic upgrade package is successfully downloaded to the device, run the upgrade system rgos.bin command to upgrade the line card.
Ruijie#upgrade system rgos.bin

10. Reload the system.
Ruijie#Reload
Proceed with reload?[no] y

11. Run the following command to check whether the router is upgraded successfully:
show version

Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register now