Forgot password?
 Register now
Products

Ruijie RG-EG2100-P v2 How to setup LAN port for 2 network Reply
Ruijie RG-EG2100-P v2 How to setup LAN port for 2 network
2446 6 2021-4-20 09:37:14
Edited by itphuket@salaphuket.com at 2021-4-20 09:37

Dear support Ruijie

Product : Ruijie RG-EG2100-P v2
I would like how to setup LAN port for 2 network.

Simple
PORT WAN0 : IP Address ISP1
PORT WAN1 : IP Address ISP2
PORT LAN2-LAN4 : DHCP IP Address 192.168.1.0/24
PORT LAN5-LAN7 : DHCP IP Address 192.168.10.0/24

Can you setup LAN port 2 network class for Ruijie RG-EG2100-P v2 ?

0 2021-4-20 11:31:07 View all replies
Dear sir,

Sorry can't split the LAN port of the EG2100-P, they are on bridge mode.
If you want to use another vlan IP, need to configure sub-interface

best regards
Daisy


sub-interface.png

1 2021-6-3 20:38:40 View all replies
I am using EG2100-P as well. can I apply same vlan ID on different ports?

For example, I add VLAN30 vlan40 using sub interface in port 2, can I apply same setting in port 3?

Thanks

ty.principal@pe replied at 2021-6-3 20:38
I am using EG2100-P as well. can I apply same vlan ID on different ports?

For example, I add VLAN3 ...

hi bro,

you can add vlan30 and vlan40 on LAN port 2 as a sub interface, and the port 3-7 will inherit the setting on LAN port 2, as i know, EG2100-P v2 port arrangement should be WAN0, WAN1 / LAN1, LAN2-7, only WAN1/LAN1 can be convert either WAN or LAN.

0 2021-8-21 06:07:06 View all replies
ty.principal@pe replied at 2021-6-3 20:38
I am using EG2100-P as well. can I apply same vlan ID on different ports?

For example, I add VLAN3 ...

hi bro, you cannot apply same vlan and same ip prefix on sub interface, it will conflict.

1 2021-10-8 08:21:00 View all replies
Hello, Can I build the sub interfaces in LAN1/WAN1 port? What happens to LAN ports 2-7?

Mario replied at 2021-10-8 08:21
Hello, Can I build the sub interfaces in LAN1/WAN1 port? What happens to LAN ports 2-7?

hi bro, you can add a sub interface on LAN1/WAN1, when you convert the WAN1 to LAN1, if you select layer 2, it will inherit the setting from LAN2, if you select LAN, it will become a separate LAN port. you cannot add same Network ID and VLAN ID on LAN1 (LAN) and LAN2, it will conflict. Example,

LAN1 = 192.168.0.0/24 (VLAN10)
LAN2 = 192.168.10.0/24(VLAN20)

Share this topic to

Cancel

This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.

More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.

©2000-2022 Ruijie Networks Co,Ltd