Forgot password?
 Register now
Products

How to turn off AP LED in fixed time? Reply
How to turn off AP LED in fixed time?
1288 2 2021-6-23 22:34:53

The configuration guide to turn off ap led in fixed time is shown as below:

I. Requirements

Client wants to turn off AP LED in fixed time everyday automatically

II. Network Topology

                                               

III. Configuration Steps

Configuring turn off AP LED in fixed time

Fit AP

Configuring on AC

AC>enable

AC#configure terminal

AC(config)#schedule session 1   

AC(config)#schedule session 1 time-range 1 period Wed time 13:30 to 20:20    ----->time range from 13:30 to 20:20 on Wednesday

AC(config)#clock timezone UTC +8  ---> set time zone,  +8 hours offset

AC#clock set 11:33:00 8 6 2014      ---->set current time   11:33:00 6th Aug 2014

AC#show clock

AC#configure terminal

AC(config)#ap-config all

AC(config-ap)#quiet-mode session 1

AC(config-ap)#end

Recommend configure sntp, or the clock will return to the factory after reboot AP

AC(config)#sntp enable      ----->enable sntp service

AC(config)#sntp server 192.168.2.1   ----->configure sntp server

AC#write

Fat AP

Configuring on Fat AP

FatAP>enable

FatAP#configure terminal

FatAP(config)#schedule session 1   

FatAP(config)#schedule session 1 time-range 1 period Wed time 13:30 to 20:20   

FatAP(config)#clock timezone UTC +8  ---> set time zone,  +8 hours offset

FatAP#clock set 11:33:00 8 6 2014

FatAP#show clock

FatAP#configure terminal

FatAP(config)#quiet-mode session 1

FatAP(config-ap)#end

Recommend configure sntp, or the clock will return to the factory after reboot AP

FatAP(config)#sntp enable      ----->enable sntp service

FatAP(config)#sntp server 192.168.2.1   ----->configure sntp server

FatAP#write

IV. Verification

1. ALL the LED, sys, wlan & wan LED on AP, are turned off

2. System prompts logs when quiet-mode takes effect:

[Wed, 13:55] Disable by schedule.



0 2021-11-10 02:59:38 View all replies
that configure can turn of led permanently ?

0 2021-12-28 21:41:11 View all replies
The configuration information you share is completely complete, thank you for sharing!  subway surfers

Share this topic to

Cancel

This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.

More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.

©2000-2022 Ruijie Networks Co,Ltd