Please select To the mobile version | Continue to access the desktop computer version
 Forgot password?
 Register now


Wireless

View: 301|Reply: 1

How to capture packet on AC using Wireshark?

  [Copy link]

36

Digests

681

Posts

863

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
863
Post time 2021-8-2 13:04:30 | Show all posts |Read mode
When there are wireless 802.1x or web  issues, need capture packet to check, you can refer to the following guide to capture the auth packet on the AC.

1.topology
  
2. Port Mirror
Configuring the following command on AC.
Ruijie(config)#monitorsession 1 source interface gigabitEthernet 0/3 both   ----you can change the port by ture
Ruijie(config)#monitorsession 1 destination interface gigabitEthernet 0/1 switch

3. After PC connect to AC,open thewireshark, choose the interfaces to capture from, then start

4.try to connect to the ssid and import username and password

5.save the packet


Reply

Use magic Report

Digests

Posts

0

Credits

Novice

Rank: 1

Credits
0
Post time 2021-8-25 15:02:24 | Show all posts
A detailed guide to the auth package on AC. I'm still having trouble with some steps, maybe I'll have to take a closer look at the instructions. cookie clicker
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register now