Please select To the mobile version | Continue to access the desktop computer version
 Forgot password?
 Register now


Security

View: 362|Reply: 2

How to configure policy route on EG?

  [Copy link]

37

Digests

704

Posts

891

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
891
Post time 2021-9-3 14:45:16 | Show all posts |Read mode

I want VLAN 1 go through WAN 1, VLAN 2 go through WAN 2, how can I do it?


You can use the policy route to do it, for example

     vlan 1 is 192.168.1.0   vlan 2 is 192.168.2.0.

     WAN 1 is 10.100.10.1,  gateway is 10.100.10.254

     WAN 2 is 10.100.11.1,gateway is 10.100.11.254


Step 1 click route policy-base route, click add ACL


Step 2, Add two ACL 10 and 11,set ACE to permit 192.168.1.0 and 192.168.2.0



Step 3 Configure Policy route

Finished


Reply

Use magic Report

0

Digests

1

Posts

3

Credits

Novice

Rank: 1

Credits
3
Post time 2021-10-7 19:33:06 From the mobile phone | Show all posts
I have setup like this but my client seems to skip this rule and they keep go to WAN 1. My device EG-2100 v2p
Reply Support Not support

Use magic Report

37

Digests

704

Posts

891

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
891
Post time 2021-10-29 11:05:14 | Show all posts
adriana.hs599@g replied at 2021-10-7 19:33
I have setup like this but my client seems to skip this rule and they keep go to WAN 1. My device EG ...

Dear sir,

The  WAN 2 port are reachable right?
And please try to tracert on the client, to check where it can work
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register now