Please select To the mobile version | Continue to access the desktop computer version
 Forgot password?
 Register now


Wireless

View: 121|Reply: 2

Ruijie AP840 Throughput test for WiFi 6, Result : DL 801.74Mbps , UL 567.82Mbps

  [Copy link]

36

Digests

659

Posts

841

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
841
Post time 2021-9-8 20:39:59 | Show all posts |Read mode
3 Steps best practice setting :
- Channel 36
- Channel-width 160Mhz only applicable for Channel 36 or 100 only (please take note)❗❗❗❗
- Wifi 6 enable
Reply

Use magic Report

36

Digests

659

Posts

841

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
841
Post time 2021-9-8 20:45:22 | Show all posts


Reply Support Not support

Use magic Report

Digests

Posts

0

Credits

Novice

Rank: 1

Credits
0
Post time 4 day(s) ago | Show all posts
Thank is awesome...

I also use the same access point, however I cannot reach the same performance.

I installed in a crowded wireless environment. Initially, I set the frequency width to 80 MHz 2,4 and 5G, but the performance was bad. Latency and loss was off the roof. Bandwidth test also really bad, in average less than 10 mbps.

When I switched to 20 MHz for both 2,4 and 5 G, the performance is improved drastically. A 2,4 able to get around 50 mbps, while 5G can get more than 100 mbps.

Do we have to consider our wireless environment before deciding the frequency width?

Thank you
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register now