Please select To the mobile version | Continue to access the desktop computer version
 Forgot password?
 Register now

Ruijie Cloud

View: 355|Reply: 0

[User Guide] How to configure different SSIDs for different APs in the same network

[Copy link]






Rank: 1

Post time 2021-9-18 15:28:28 | Show all posts |Read mode
The 'Apartment WIFI' was the solution and the configurartions was followed below.
1.Fitstly, adding a new SSID in the target network/project. as shown in the followed picture

2.Secondly, clicking the 'more' button at the upper right corner of the page to enable the

3.Clicking 'OK'

4.Thirdly, noticing the naming rules and adding the SSID prefix.Taking the 'GroupSSID-' as an example Then click 'OK'.

5.Then, a new SSID was appeared in the SSID list. In this step, don't forget click the 'Save' to save your configuration.

6. By the way, checking the name of the APs and their network, and checking the syn status of APs.

7. If 'syschronized', then can find the two apartment ssid. 'AP710' SSID at users end is “GroupSSID-AP710”, and 'apartment-AP1' SSID is “GroupSSID-testAP2”

That's all.
Welcome to contact us again if you have any questions or advices


Use magic Report

You have to log in before you can reply Login | Register now