[Wireless]Wall-Mount Access Point Series Parameter Table

Model	AP130(L)	AP130(W)	AP130(W2)	AP130-W V1.0	AP130-W V1.1
Recommended Number of Clients	32	32	32	32	32
Maximum Number of Clients	32	32	32	240	32
WLAN ID Number	8	8	8	8	8
WDS	Not Support	Not Support	Not Support	Not Support	Not Support
PPPoE Dial Function	Support	Support	Support	Support	Support
NAT	Support	Support	Support	Support	Support
Web Management Function	Support	Support	Support	Support	Support
Authorized Occupancy	0.5	0.5	0.5	0.5	0.5
GPS	Support	Support	Support	Support	Support
Power Supply	Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)	Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)	Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)	Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)	Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)
AP Coverage Area(Radius)	Approximately 1~2 rooms, one room per AP (6~10m) is recommended	Approximately 1~2 rooms, one room per AP (6~10m) is recommended	Approximately 1~2 rooms, one room per AP (6~10m) is recommended	Approximately 1~2 rooms, one room per AP (6~10m) is recommended	Approximately 1~2 rooms, one room per AP (6~10m) is recommended

Model	AP130-S	AP120(H)	AP120-S	AP120-W	AP110-W
Recommended Number of Clients	32	16	16	16	8
Maximum Number of Clients	32	32	32	32	26
WLAN ID Number	8	8	8	8	8
WDS	Not Support	Not Support	Not Support	Support	Not Support
PPPoE Dial Function	Support	Not Support	Not Support	Support	Not Support
NAT	Support	Support on MACC	Not Support	Support	Not Support
Web Management Function	Support	Support【Fat】	Support	Support	Not Support
Authorized Occupancy	0.5	0.5	0.5	0.5	0.5
GPS	Support	Not Support	Not Support	Support	Not Support
Power Supply	Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)	Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)	Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)	Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)	Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)
AP Coverage Area(Radius)	Approximately 1~2 rooms, one room per AP (6~10m) is recommended	Approximately 1~2 rooms, one room per AP (6~10m) is recommended	Approximately 1~2 rooms, one room per AP (6~10m) is recommended	Approximately 1~2 rooms, one room per AP (6~10m) is recommended	Recommend a room (6~8m)

Model	RG-AP180(Unavailable in Japan)
Recommended Number of Clients	32
Maximum Number of Clients	1024
WLAN ID Number	8
WDS	Not Support
PPPoE Dial Function	Support
NAT	Support
Web Management Function	Support
Authorized Occupancy	0.5
Power Supply	Support PoE Support local power supply (DC Power adapters should be purchased from third-party vendors separately if needed)
AP Coverage Area(Radius)	about 1 - 2 rooms, recommend one room (6 - 10m)

hi, can you add RG-AP180 model too

hi, can you add RG-AP180 model too

dananto@wptekno replied at 2022-1-28 21:13
hi, can you add RG-AP180 model too

dear sir, already added it, pls check.

Others Ruijie AP series devices parameters
[Wireless]Ruijie AP Series Parameters Table