Please select To the mobile version | Continue to access the desktop computer version
 Forgot password?
 Register now


Wireless

View: 417|Reply: 1

How to make AP's led lights flash ?

  [Copy link]

Digests

Posts

0

Credits

TAC

Rank: 9Rank: 9Rank: 9

Credits
0
Post time 2021-11-6 14:09:39 | Show all posts |Read mode
Edited by zhangwei13 at 2021-11-10 17:34


Scenario:If there are so many APs managed by AC but you can not distinguish those APs. If so, you can let the AP flash its led so that you can figured out.

It's indicated that this function of the AP can only be implemented on the AC, and there is no'led on' command in the AP itself.
Using the Ruijie AP-720 as a test.

Before the test:The AP was working nomally and led of AP was blue
FB2.png


Typing the belowed commands on AC.
ws6108#conf t
ws6108(config)#ap-config AP1    //Can also be configured in ap-config all mode, if so all aps will be conducted this command
ws6108(config-ap)#led on          //turn on the led

Result:The led of AP will be changed to red and flash
FB1.png

Typing the belowed commands on AC.
ws6108(config-ap)#led off          //turn on the led
ws6108(config-ap)#write

Result:The led of AP will be changed to blue again and no flash
FB2.png

End.
Welcome to contact us again if you have any questions or advices.




Reply

Use magic Report

0

Digests

1

Posts

3

Credits

Novice

Rank: 1

Credits
3
Post time 2021-12-27 13:26:56 | Show all posts
This is something that a lot of people dream of doing and is definitely a very good way to get started as a copywriter. A fifth idea would be to do your own. The best essay writing sites share Search engine optimisation is a very popular topic that people are often looking for.
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register now