|
Preemption means that a new higher priority device is added to a stable network, and the Master will change accordingly. Typical preemption scenarios: a) EG device is added to the RAP networking: 1) After the Master is successfully elected, a new EG is added and will become the new Master. 2) Preemption time: 7-8s b) RAP device is added to the RAP networking: 1) After the Master is successfully elected, if a new RAP with higher priority is added, preemption will be delated. 2) Preemption time: If the boot time of the Master is less than 36 hours and the boot time of the new device is longer than 5 minutes, preemption will start. Otherwise, preemption will start if new device boot time is longer than 30 minutes. Notice: EG device can only act as the master and cannot be preempted. EG cannot be changed as a slave device. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
