|
There are three ways to log in to the device: a) Log in to the device in a wired way: 1) Connect PC to the LAN port of the device. 2) Set the IP addresses of PC and management interface are within the same network segment. 3) Log in to the device by using the default management address 10.44.77.254. b) Log in to the device in a wireless way: 1) Connect to the default wireless SSID “@Ruijie-bXXXX”. 2) Log in to the device by using the default management IP address 10.44.77.254. c) Log in to the device via Ruijie Cloud APP: 1) Connect to the default SSID “@Ruijie-bXXXX”.   2) Check whether the devices are detected. 3) Name the project and enter your password.   4) Finish.  |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 2
