|
a) Analyze thetopology connection, if the AP is connected to the switch and DHCP is not onthe switch b) If theaddress assigned to the AP is not vlan 1, then the interface of the switchconnected to the AP is set to trunk, and the native vlan is the correspondingvlan c) If theaddress assigned to the AP is vlan 1, then the interface of the switchconnected to the AP can be set to trunk d) Make sure thatthe AP can get the address, try to ping 8.8.8.8, if successful, the AP canaccess the Internet, otherwise, enable the NAT function at the exit of theupstream device e) In the end,if you want the device to go online in the cloud, in addition to the abovechecks, you also need to check the AP's local DNS settings, CWMP configuration,and the AP's mode is macc mode (for Ruijie APs)，and you can refer to the following link https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=2011&highlight=offline |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
