Please select To the mobile version | Continue to access the desktop computer version
 Forgot password?
 Register now


Router

View: 3120|Reply: 1

The Configured NAT Load Balancing Does Not Take Effect.

[Copy link]

14

Digests

1023

Posts

1156

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1156
Post time 2017-5-4 19:04:02 | Show all posts |Read mode
The Configured NAT Load Balancing Does Not Take Effect.
Reply

Use magic Report

14

Digests

1023

Posts

1156

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1156
 Author| Post time 2017-5-4 19:04:33 | Show all posts
1. The TCP load balancing of Ruijie devices supports only extended ACL configuration. Forexample:
ip access-list extended 100
10 permit ip any host 10.0.0.1
ip nat inside destination list 100 pool server

Change the preceding configuration to the following:
ip access-list standard 10
10 permit host 10.0.0.1
ip nat inside destination list 10 pool server


2. IP address selection for an external network
TCP load balancing supports mapping only from a server address to an outbound interface IP address of an external network or an IP address in other network segments.The server address cannot be mapped to another IP address in the same network segment as the outbound interface. In the preceding example, the IP address of the outbound interface is 10.0.0.1/24, the two servers can be mapped to 10.0.0.1 or an address in other network segments (such as 20.0.0.10). They cannot be mapped to 10.0.0.10 (another address in the same network segment as the outbound interface).

Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register now