|
This example shows how to prune a trunk port to carry traffic only for vlan 5, 10 and 20-30
|
|
Hi there. I'm trying to configure a trunk port in a Ruijie AP180 in the GigabitEthernet 0/1 port. This is my configuration as follows: interface GigabitEthernet 0/1 encapsulation dot1Q 1 ip dhcp snooping trust interface GigabitEthernet 0/1.23 encapsulation dot1Q 23 ip dhcp snooping trust interface GigabitEthernet 0/1.27 encapsulation dot1Q 27 ip dhcp snooping trust interface GigabitEthernet 0/2 encapsulation dot1Q 23 interface GigabitEthernet 0/3 encapsulation dot1Q 27 However It doesn´t work as it should be neither the Gigabit 0/2 or 0/3 are working, I followed some tutorials from community. Any advide? Im using the lastest firmware |
Reinier Ballester replied at 2022-9-2 05:17 Dear sir May I know how you test that it cannot work? Does the vlan23 and vlan27 can go through the g0/1 successfully? Best regards Jenny |
GTAC-Jenny replied at 2022-9-2 15:31 Hi there, I resolved that in this way: I put the Cisco port switch in trunk mode witch native vlan 23 an passing aditional the vlan 27. In the AP the default native vlan is 1 so work in all interfaces as "23". So I deleted the 23 and just pass the 27 and put in the the second port the 27 and work as it should. Thank you |
Edited by Dan Capina at 2024-3-15 15:56 Reinier Ballester replied at 2022-9-6 10:48Hi there, I resolved that in this way:I put the Cisco port switch in trunk mode witch native vlan ...  AP840-I version AP_RGOS 11.9(6)W1B1, Release(09173122)How do I configure the trunk thru CLI or WEB? |
Dan Capina replied at 2024-3-15 15:54 Hello sir, trunk or access is switch concept, you cannot cobfigure it on AP |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
