What is the radio3 used for?

admin · Post time 2017-4-27 14:36:57

admin · Post time 2017-4-27 14:37:23

Radio3 is used for some devices which support 3 radios such as AP 740-I, when radio3 selected in SSID settings, it can be configured via CLI Command.

allen_lim · Post time 2017-6-1 16:59:54

admin replied at 2017-4-27 14:37
Radio3 is used for some devices which support 3 radios such as AP 740-I, when radio3 selected in SSI ...

Do you have a list of devices that supporting 3rd radio ?

admin · Post time 2017-6-2 11:15:26

For now, only AP740-I supports 3rd radio.

kuangwojia · Post time 2017-7-7 10:37:41

Good......

marcelo@wi2be.c · Post time 2018-8-18 01:58:02

Radio3 is enabled by default on 740i???

admin · Post time 2018-8-30 13:45:20

marcelo@wi2be.c replied at 2018-8-18 01:58
Radio3 is enabled by default on 740i???

the radio 3 is working in monitor mode by default, so it doesn't broadcast SSID.

you can enable it via CLI. Here is an example to enable the third radio of ap740:

https://community.ruijienetworks ... 8&highlight=740

tuan2tech@gmail · Post time 3 day(s) ago

Hi you

I used AP630, How mesh works when there is only one 5ghz band?

		Remember me	Forgot password?
Password			Register now

[MACC-BASE] What is the radio3 used for?

Ruijie Networks