|
This function is used for the 802.1X-based VLAN Assignment802.1X-based VLAN Assignment. Need to configure it use the following command. First, configure vlan group Ruijie>en Ruijie#config ter Ruijie(config)#vlan range 2-10 Ruijie(config)#vlan-group 10 Ruijie(config-vlan-group)#vlan-assign-mode dot1x Ruijie(config-vlan-group)#vlan-list 1-10 Ruijie(config-vlan-group)#default-vlan 1default-vlan 1 Second, encapsulated the vlan group with interface and WLAN. Ruijie(config#int gi 0/1.1 Ruijie(config-subif-GigabitEthernet 0/1.1)#encapsulation dot1Q group 10 Ruijie(config-subif-GigabitEthernet 0/1.1)#ip dhcp snooping trust Ruijie(config)#interface dot11radio 1/0.1 Ruijie(config-subif-Dot11radio 1/0.1)#no encapsulation Ruijie(config-subif-Dot11radio 1/0.1)#encapsulation dot1Q group 10 Ruijie(config)#interface dot11radio 2/0.1 Ruijie(config-subif-Dot11radio 1/0.1)#no encapsulation Ruijie(config-subif-Dot11radio 1/0.1)#encapsulation dot1Q group 10 |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 2
