Please select To the mobile version | Continue to access the desktop computer version
 Forgot password?
 Register now


Security

View: 2827|Reply: 1

M5100 prompts system error when converted to transparent mode.

[Copy link]

10

Digests

32

Posts

84

Credits

registered member

Rank: 2

Credits
84
Post time 2017-7-4 16:46:20 | Show all posts |Read mode
M5100 prompts system error when converted to transparent mode.
Reply

Use magic Report

10

Digests

994

Posts

1107

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1107
Post time 2017-7-4 17:04:40 | Show all posts
Check whether the following configuration is done:

1Remove the LAN interface configuration
Need to delete the relevant configuration may include the following aspects (Equipment factory default comes with firewall strategy and dhcp service of LAN port):
(1) Firewall policy, if the lan port configuration strategy, as the source interface or destination interface.
(2) Static routing, delete the related routing entries of LAN port.
(3) DHCP service.
(4) IPsec, VIP and so on.
(5) Address object.

2Switch working mode of LAN
In the bottom split LAN port, can through the following order to switch the operation mode of LAN: (need to enter print cliovrd enabl4e first, and then exit and login can enter the following command)
RG-WALL#config system virtual-switch
RG-WALL(virtual-switch)#delete lan
RG-WALL(virtual-switch)#end

3If the device is p3 version, need to close of the wan1 and wan2 port auto-ipsec attribute at the bottom.

Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register now