Forgot password?
 Register now
Products

Official
How to configure wired repeater? Reply
How to configure wired repeater?
500 2 2022-4-25 17:46:13
Step 1: Connect  your PC to the EW1200G Pro LAN port, and then login it with the default LAN IP 192.168.110.1




Step 2: Click More -> Repeater/WISP, choose Access Point mode, and then click Check.




Step3: Configure the Local Router Wi-Fi and Save.





Finish


RG-EG210G-E

Router tips
1 2022-7-21 22:14:49 View all replies
ive tried doing this remotely via wan port but when i press the check button it disconnects for a sec and wont save the setting . is there a way to do it via the cloud software and in batch ?


Jeandre Bezuidenhout replied at 2022-7-21 22:14
ive tried doing this remotely via wan port but when i press the check button it disconnects for a se ...

which model were you tried to mesh?
Usually i just connect to the default SSID, and use that to go search for the SSID that it wish to mesh first.
B4 or after that, scan the QR code into the project of your cloud account, it should work seamlessly after that.
Bear in mind that mesh Wi-Fi under EW series can't support multiple VLAN but wired repeater can.

Share this topic to

Cancel

This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.

More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.

©2000-2022 Ruijie Networks Co,Ltd