|
1.Cli configuration for native vlan on switch port For example, set vlan10 to the native vlan Ruijie(config)#int g0/1 Ruijie(config-if-GigabitEthernet 0/1)#switchportmode trunk Ruijie(config-if-GigabitEthernet 0/1)#switchporttrunk native vlan 10 Check configuration.  2.Web configuration for native vlan on switch port For example, set vlan 7 to the native vlan. Select a port, specify Native VLAN and Allowed VLAN, and click Save. The "Configuration succeeded." message is displayed. In this case, the newly added trunk port is displayed in the trunk port list.  Check configuration  |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 4
