Forgot password?
 Register now
Products

How to configure guest WiFi for Ruijie AP on Ruijie Cloud? Reply
How to configure guest WiFi for Ruijie AP on Ruijie Cloud?
360 0 2022-7-5 11:28:06
a) Create a guest SSID and set the forward mode as NAT.


Notice:
The IP address of  default address pool is 192.168.23.0/24
You can click NAT Address Pool Configuration to change the NAT Address Pool :





After changing the configuration, you need to click Save.






b) Set ACL to block guest users accessing to the intranet resource on CLi of Ruijie AP.

Command:
The ACL configuration example:
Guest vlan: vlan 233 192.168.7.0/24
Intranet resource vlan: vlan 6, 192.168.6.0/24

Ruijie#con ter
Ruijie(config)#ip access-list extended 107
Ruijie(config-ext-nacl)#10 deny ip 192.168.7.0 0.0.0.255 192.168.6.0 0.0.0.255
Ruijie(config-ext-nacl)#20 permit ip any any
Ruijie(config-ext-nacl)#exit
Ruijie(config)#interface BVI 233
Ruijie(config-if-BVI 10)#ip access-group 107 in
Ruijie(config-if-BVI 10)#end
Ruijie#wr

c) Validation results


RG-AP180

tips others Wireless config
There are no replies.

Share this topic to

Cancel

This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.

More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.

©2000-2022 Ruijie Networks Co,Ltd