Click Basis > LAN > LAN Settings, and enable the Port VLAN function Click Add to add a new VLAN  Click Port VLAN to configure the port settings based on the VLAN  UNTAG: If the VLAN 10 is set as the untag VLAN of port 2, VLAN 10 will be the native VLAN of port 2. The packets from VLAN 10 will be forwarded over port 2 without tag VLAN 10 and all untagged packets over port 2 will be taken as the packets from VLAN 10. ● Each port can be configured with only one untag VLAN. ● The native VLAN of port 1 is the default VLAN and cannot be edited. TAG: If both VLAN 10 and VLAN 20 are set as tag VLAN of port 2, the packets from VLAN 10 and VLAN 20 will be forwarded over port 2 with the corresponding VLAN tag. Not Join: If both VLAN 10 and VLAN 20 are set as Not Join port 2, port 2 will not receive or transmit packets from VLAN 10 or VLAN 20. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
