Port-Security sticky commands

Hey, Ruijie!

We are in stage for implementing RG-S5310-48GT4XS-P-E as access layer in our organization.
We completed base configuration by some helpful topics and manual for CLI rg-s2700 but we faced one problem:
With our security principles we are using switchport port-security sticky in protect mode, but in some cases we need to remove already binded sticky MAC's.
Is there any equivivalent of Cisco command "clear port-security mac-address sticky interface gi0/1"?
Thanks in advance!

Hi sir, sorry for reply lately. Try using the below commands to remove the binded sticky MAC

Ruijie(config)#interfac fastEthernet 0/1



Ruijie(config-if-FastEthernet 0/1)#no switchport port-security mac-address
0021.CCCF.6F70

Ruijie(config-if-FastEthernet 0/1)#no
switchport port-security binding 0021.CCCF.6F70 vlan 1 192.168.1.1   


Ruijie(config-if-FastEthernet 0/1)#end