How FAP AP configures speed limits？

1.Speed limit command based on the entire
Ruijie (config) #wlan-qos ap-based {per-user-limit | total-user-limit} {down-streams | up-streams} average-data-rate average-data-rate burst-data-rate burst-data-rate
Per-user-limit: Limit the speed of each user on the AP
Total-user-limit: Limit the speed of the entire AP
Down-streams: Setting the downlink traffic speed limit parameter of the AP.
Up-streams: Setting the AP's upstream traffic speed limit parameter.
Average-data-rate: Setting the average rate limit, the unit is 8Kbps, and the range is 8-261120.
Burst-data-rate: Setting the burst rate limit, the unit is 8Kbps, and the range is 8-261120.
Example:
Setting the downlink average rate of each user on the AP to 800KB/s, and the burst rate to 1600KB/s.
Ruijie (config) #wlan-qos ap-based per-user-limit down-streams average-data-rate800 burn-data-rate 1600
2.SSID based speed limit command

Ruijie (config) #wlan-qos wlan-based {wlan-id | ssid} {per-user-limit | total-user-limit} {down-streams | up-streams} average-data-rate average-data-rate burst-data-rate burst-rate
Per-user-limit: Speed limit per user on wlan/ssid
Total-user-limit: Speed limit for the entire wlan/ssid
Down-streams: Setting the downlink traffic speed limit parameter of wlan/ssid.
Up-streams: Setting the upstream traffic speed limit parameter of wlan/ssid.
Average-data-rate: Setting the average rate limit, the unit is 8Kbps, and the range is 8-261120.
Burst-data-rate: Setting the burst rate limit, the unit is 8Kbps, and the range is 8-261120.


Example: Setting the downlink average rate of each user on wlan/ssid to 800KB/s and the burst rate to 1600KB/s.
Ruijie (config) #wlan-qos wlan-based per-user-limit down-streams average-data-rate 800 burst-data-rate 1600
3.Speed limit commands based on a single

Ruijie (config) #wlan-qos netuser mac-address {inbound | outbound} average-data-rate average-data-rate burn-data-rate burn-data-rate
Mac-address: Indicates the user MAC address that needs to be set.
Inbound: setting the user's upstream traffic speed limit parameter.
Outbound: setting the user's downstream traffic speed limit parameter.
Average-data-rate: setting the average rate limit, the unit is 8Kbps, and the range is 8-261120.
Burst-data-rate: setting the burst rate limit, the unit is 8Kbps, and the range is 8-261120.
Example:
Setting the upstream average rate of user 0000.0000.0001 to 800KB/s, and the burst rate to 1600KB/s
Ruijie (config) #wlan-qos netuser 0000.0000.0001 inbound average-data-rate 800 burn-data-rate 1600