Failover RG-EG105G-V2 Dual Line -

Hola que tal, tengo una duda, cuando hago balanceo de dos ISP no generan problemas en cuanto a las plataformas de streaming?,  por lo general otros fabricantes me han indicado que cuando se hace balanceo se tiene problemas con la carga de lo que es multimedia porque la carga y descarga se hace por medio de dos ISP lo que genera errores  

Dear sir,
Taffic will be routed based on ISP settings preferentially.  The remaining traffic will be managed according to load mode. The load mode as follows:
1. Balanced mode: The traffic will be spread across multiple links according to the weight of each WAN port. For example, if WAN and WAN1 weight are set to 3 and 2 respectively, 60% of the total traffic will be routed over WAN and 40% over WAN1.
2. Primary & secondary mode: All traffic is routed over the primary interface. Once the primary interface fails, traffic will be switched over to the secondary interface. If there are multiple primary and secondary interfaces, please configure their weight (See balanced mode).
For more details,You can check out page 46 of this link: https://www.ruijienetworks.com/resources/preview/77309
Best Regards,
Steve

Steve replied at 2022-11-11 09:34
Dear sir,
Taffic will be routed based on ISP settings preferentially.  The remaining traffic will be ...

Good Day!

I have concern about that failover PRIMARY and SECONDARY mode I would like to happen that the PRIMARY will be the main priority meaning that when the PRIMARY disable or loss connection the SECONDARY will the backup, all of the connected will going to the SECONDARY when the PRIMARY is up or connected all of the SECONDARY connected will be transfer to the PRIMARY automatically, now my problem was sometime it will effect and sometime not meaning when the PRIMARY was up or connected all the the SECONDARY connected will be remain it will not transfer to the PRIMARY ISP is there any solution for this?

Argie Atillo replied at 2023-2-12 13:01
Good Day!
I have concern about that failover PRIMARY and SECONDARY mode I would like to happen tha ...

Dear sir,
May I know you mean is that when the primary link fails, it is automatically switched to the standby link, and
when the primary link recovers, it is not automatically switched to the primary link, right?

Best regards,

Steve