|
Step 1. Enable the DHCP feature on device Ruijie>en Ruijie#config ter Ruijie(config)#service dhcp ------> This command is not enabled by default, and the switch must be configured Step 2. Create the gateway IP address of DHCP clients Ruijie(config)#interface vlan 10 Ruijie(config-if-VLAN 10)#ip address 192.168.1.254 255.255.255.0 Ruijie(config-if-VLAN 10 )#exit Step 3. create the DHCP pool for clients in device Ruijie(config)#ip dhcp pool vlan10 Ruijie(dhcp-config)#network 192.168.1.0 255.255.255.0 Ruijie(dhcp-config)#dns-server 218.85.157.99 ------>Configure the DNS server addresses assigned to clients Ruijie(dhcp-config)#default-router 192.168.1.254 ------>Configure the gateway address assigned to the clients, which should be consistent with the IP address set on this switch, 192.168.1.254 Ruijie(dhcp-config)#end Ruijie#wr |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 4
