|
1. VAC does not support IPV6, NAT (NAT is enabled on AC), GSN, RPCAP, RF ping, RRM, WIDS, STP, RSTP, MSTP, and MESH 2. VAC does not support built-in web authentication, first-generation web authentication 3. VAC does not support hot spare between VAC and VAC also does not support roaming between VAC and VAC 4. VAC does not support related control domain, co-frequency networking, wireless positioning, cloud AC management, AC forwarding mode and so on 5. AP load balancing does not support load balancing on the AC, it depends on the load balancing of the aggregation port connected to the switch 6. The AC/AP cross-NAT deployment scenario is affected. In this scenario, the source IP addresses of APs may be the same, and the APs with the same source IP address will be loaded to the same AC, resulting in poor load balancing effect. 7. Port mirroring is not supported. When port mirroring is enabled, packets are transmitted through the VSL, which may lead to VAC splitting. 8. VAC currently does not support centralized forwarding roaming across WLANs 9. VAC cannot be deployed in the 2 ACs which across NAT |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 4
