How to reset the password of AC/AP
I. Network Topology
II. Configuration Steps (configuration file remains) 1. Power off the device, then power up. 2. Press CTRL +C, enter CTRL mode. 3. Input CTRL+Q,enter uboot mode. And then input "main_config_password_clear" 4. Device will be reloaded automatically. 5.When finish reloading, enter CLI without input password. Note: The default timeout period is10min. Please change your password before time out.
6.Change password, and then use the command“wr” to save your configuration. 7.save configuration Re-login the device, and execute the command "show runing-config" to check configurations.
|