New feature request WIS Cloud Management & AC Controller

Hi I have any a question for WIS Cloud Controller  WIS system as this was a very good feature Optimize wireless , is it possible to add can set configure Radio frequency (RF) 80Mhz & 160 Mhz on Config Planning due to last version do not support now,


and can set profiles Radio frequency (RF) in local AC Controller a while look like might be configure with AP one by one ,need to deployed configure one time to AP








Please be consider in this case ,

1. Is this the WIS2.0?
2. Do you mean set RF to all AP at the same time?

GTAC-Patrick replied at 2023-3-14 15:03
1. Is this the WIS2.0?
2. Do you mean set RF to all AP at the same time?

1. Is this the WIS2.0?

Correct this interfaces version 2.0  

2. Do you mean set RF to all AP at the same time?

Exactly Current version still can't configure RF group profiles ,

atomh2r replied at 2023-3-14 15:46
1. Is this the WIS2.0?

Correct this interfaces version 2.0  

Sorry, but for now WIS 2.0 does not support to change RF when using optimization.
And for another concern, if you want to configure RF for all AP, you need to login to CLI of ruijie AC.
You can use these commands below:
WS6008>enable

WS6008#conf

WS6008(config)#ap-config all

You are going to config all APs.

WS6008(config-ap)#chan-width ?

160 Config channel width 160Mhz

20 Config channel width 20Mhz

40 Config channel width 40Mhz

80 Config channel width 80Mhz

WS6008(config-ap)#chan-width 160



WS6008(config-ap)#end



WS6008#wr

These could include changes to the dashboard layout, the addition of new features or tools, or improvements to the overall usability of the platform.

gemma lyly replied at 2023-4-26 12:21
These could include changes to the dashboard layout, the addition of new features or tools, or impro ...

Hi sir,
Thank you for your attention to WIS Cloud. Your request on WIS Cloud is evaluated by the IT team of WIS Cloud now. If there are any update, I will inform you.