 Option 43: When the AC (wireless controller) and the AP arenot in the same LAN, the AP cannot discover the AC through broadcast afterobtaining an IP address from the DHCP server. If you want to enable the AP todiscover the AC, you need to configure Option 43 carried in the DHCP responsepacket on the DHCP server. Option 138: Enter the IP address of the AC. Similar to Option43, when the AC and AP are not in the same LAN, you can configure Option 138 toenable the AP to obtain the IPv4 address of the AC. Option 150: Enter the IP address of the TFTP server. Enter the IP address of the TFTP server to specify the TFTP server address assigned tothe client. Multiple IP addresses can be entered and separated by spaces. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
