 IPv6-to-IPv6 Network Address Translation (NAT66):It replaces the IPv6 address prefix in the packet header with another IPv6address prefix to implement IPv6 address translation. NAT66 is mainly used on the edge devices connectingtwo IPv6 networks. It allows Intranet users to access the external publicnetwork and allows the external public network to access some internal networkresources (such as internal servers) Enable NAT66 not only protects the privacy of IPv6users on private networks, but also reduces the cost of maintaining andmanaging IPv6 networks. If the current device cannot access the Internet through DHCP or cannot obtain the IPv6 prefix, you need to enable the NAT66function to allocate IPv6 addresses to clients on the internal network. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 4
