|
Scenario: A static MAC address binds the MAC address of anetwork device with a port of a switch. When connected to other ports of the switch, the network device will not be able to communicate with other devices. I. Configuration Step: Ruijie>enable -------> bind the mac address0001.1111.1111 of vlan 1 with port f0/1 of the switch; if this mac address is connected to other ports such as f0/2, it will be able to cRuijie#configure terminal Ruijie(config)#mac-address-table static 0001.1111.1111 vlan 1 int fastEthernet0/1 ommunicate with other devices ------> save the configurationRuijie(config)#end Ruijie#write Note: When the switch receives a packet containing the specified MAC address on the specified VLAN, the packet is forwarded to the bound interface. II. Verification: Run the 'show mac-address-table static' command toc heck whether the configuration takes effect. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 4
