How to configure the PPPoE server global settings on Reyee EG?

1. Get into EG Eweb and find the PPPoE Server configuration--->Global Settings



2. Configure the settings as appropriate. And check the tips carefully. You can click 'Help' on the right to learn what each parameter is for.



3. After you are done with the configuration, please click 'Save' to make it work. And then your Reyee EG will work as a PPPoE server.



And then you need to add accounts for your PPPoE server.
1.Get into EG eweb and find the PPPoE Server configuration--->Account Settings


2. Click 'Add' to add a new account for your PPPoE server



3. Configure Username, Password(Mandatory) and Expire Date, Remarks, Status and Flow Control (Optional).
Note: Flow Control can be enabled only if smart flow control has been enabled already



4. Click 'Batch Config', and then download the file template to add multiple accounts at once. Please carefully check the Note when doing batch config.





5.Click 'Backup Config' to backup your accounts configurations