|
When you login to the Eweb of Reyee NBS series switches, you can check the PoE status by following these steps: 1.Enter this page: [More] > [Ports] >[PoE]  2.You can check the global PoE information on the PoE Overview part.  3.Scroll down, you can check the Port PoEInformation on the Port List part .  |
|
Edited by LORDBYAKU at 2023-5-25 16:32 Hello Sophia, what about difference of Priority? and when we should change it?  |
LORDBYAKU replied at 2023-5-25 16:31 Dear sir, The power supply priority of the port is divided into three levels: High, Medium, and Low In auto and energy-saving modes, ports with high priorities are powered first. When the system power of the PoE device is insufficient, ports with low priorities are powered off first. Ports with the same priority are sorted by the port number. A smaller port number indicates a higher prior. Best regards, Jayden |
GTAC-Jayden replied at 2023-5-25 16:47 that's great, thank for your information Jayden  |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 4
