|
Internet Connection Type: If you select DHCP, and the device will get an IPv6 address from the upstream device. If you select Static IP, please configure the IPv6 address, gateway address and DNS server address manually. If you select NULL, the IPv6 address function will be disabled on the WAN port  IPv6 Assignment: Choose Auto to use both DHCPv6 mode and SLAAC mode to allocate address. Choose Null to assign no address. You are advised to choose Auto.  the subnet prefix length to a value smaller than or equal to 64.  Click Advanced Settings to perform the advanced settings. See the following figure for the recommended configuration.  Click DHCPv6 Clients to view the list of clients that have obtained IPv6 addresses from the router.  |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
