Please select To the mobile version | Continue to access the desktop computer version
 Forgot password?
 Register now


Wireless

View: 2662|Reply: 1

How to fix when the system can output information but cannot be operated during CRT-based logon through the Console port?

[Copy link]

10

Digests

994

Posts

1107

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1107
Post time 2018-4-9 10:28:50 | Show all posts |Read mode
Logon through the Console port, there isinformation prompted, but no response is returned after Enter is pressed.Besides, no command can be entered.

Reply

Use magic Report

10

Digests

994

Posts

1107

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1107
 Author| Post time 2018-4-9 10:30:21 | Show all posts
Troubleshooting Steps

(1)Check whether the CRT or the HyperTerminal is used. If CRT is used, uncheckCTS/RTS.
(2)If an additional cable is used, confirm whether the driver is installed correctly.
(3)Change the baud rate. the correct baud rate is 9600.
(4)Change the console cable and the PC.


Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register now